Serving Seattle to Mount Vernon — free on-site estimates
Chimney Repair · Mill Creek, WA

Chimney Repair in Mill Creek, WA

We rebuild wood-framed chimney chases: framing, sheathing, siding, flashing and a sloped cover that sheds water. We serve homeowners across Mill Creek and Snohomish County.

Licensed, bonded & insured · 24-Month Workmanship Warranty · Free on-site estimate
Before: Rotted chimney chase framingBefore
After: Chimney chase rebuilt with new sheathingAfter

Rotted chimney chase framing replaced

Mill Creek homes

What we see with chimney chase repair in Mill Creek

Many Mill Creek homes with master-planned 1980s–2000s homes with lap siding and attached decks have wood-framed chimney chases. Where shaded greenbelts behind many lots keep back walls and decks wet, and 80s–90s builder flashing is wearing out, flat chase covers rust and leak, and the chase framing rots from the top down.

Mill Creek HOA homes often need repairs that match existing siding and paint exactly, which we plan for. We regularly work in Mill Creek Country Club, Town Center, Mill Creek East and Penny Creek.

Mill Creek is a master-planned city laid out around greenbelts, wetlands and a golf course, so many backyards back onto shaded, wet tree buffers. 1980s–2000s homes built in planned neighborhoods with consistent siding, trim and paint schemes, many under HOA guidelines.

Warning signs

Signs you need chimney chase repair in Mill Creek

  • Rust streaks running down the chase siding
  • A flat or sagging chase cover
  • Soft or bulging siding on the chase
  • Water stains near the fireplace inside
  • Cracked siding at the top of the chase
Our process

How we handle chimney chase repair in Mill Creek

1

Free on-site inspection: we probe the wood, check moisture and find where the water gets in.

2

A written scope and price with photos, before any work starts.

3

We remove every damaged section and rebuild framing, sheathing and barrier as needed.

4

Flashing, siding, trim and paint so the repair matches and the leak does not come back.

Our work

Recent chimney repair projects

See all projects →
Rotted chimney chase with the siding off
Chimney Repair project
Chimney Repair project photo
Guide

Chimney Repair in Mill Creek: what you should know

Many homes in Mill Creek have wood-framed chimney chases, boxes framed and sided like the house around a metal flue. The top of the chase is closed with a metal cover. When that cover is flat or rusted, it holds water, and the chase framing rots from the top down.

What causes it in Mill Creek

Flat or sagging chase covers

Galvanized covers rust and hold water instead of shedding it.

Missing storm collar

Water runs down the flue pipe into the chase.

Poor roof-to-chase flashing

Step flashing and counter flashing at the roof line fail and leak into the chase.

Siding without clearance at the roof

Chase siding that touches the roof soaks up water.

What our chimney chase repair includes

  • Inspection of cover, flashing, siding and framing
  • Removal of damaged siding, sheathing and framing
  • New studs, top plates and blocking
  • New sheathing and weather barrier
  • Step and counter flashing at the roof line
  • New siding and trim matched to the house
  • Sloped stainless chase cover with drip edge and storm collar

How to prevent it

  • Look for rust streaks on chase siding
  • Replace flat galvanized covers with sloped stainless ones
  • Make sure the storm collar is sealed at the flue
  • Have roof flashing checked when the roof is replaced
  • Keep chase siding painted

What affects the cost in Mill Creek

Replacing a chase cover alone is a modest job. When the framing at the top of the chase has rotted, the work includes scaffolding or roof access, framing, sheathing and siding, which adds up quickly. Catching a rusted cover early is far cheaper than rebuilding a chase.

How long it takes

A cover replacement usually takes a day. A chase rebuild with framing and siding takes three to seven days depending on height and roof access.

Why homeowners in Mill Creek choose Goodbye Rot

We fix the cause, not just the surface. Every chimney chase repair job starts with a free on-site inspection, moisture readings and photos, and you get a written scope and price before work begins. We are licensed, bonded and insured in Washington, and our repairs carry a 24-month workmanship warranty.

FAQ

Chimney Repair in Mill Creek: common questions

How do I know if my chase cover is leaking in Mill Creek?
Rust stains on the siding, standing water on the cover and soft siding near the top are the usual signs. We check the framing during the inspection.
Do you replace the chase cover too?
Yes. We install a sloped stainless cover with a drip edge and storm collar so water runs off instead of pooling.
Which Mill Creek neighborhoods do you serve?
We work throughout Mill Creek, including Mill Creek Country Club, Town Center, Mill Creek East and Penny Creek, and nearby Everett, Bothell, Lynnwood.
Is the estimate free in Mill Creek?
Yes. The on-site inspection and written estimate are free, with no obligation.
Free estimate

Need chimney repair in Mill Creek? Tell us about it.

  • Licensed, bonded & insured
  • Free on-site estimates
  • 24-month workmanship warranty

Tell us what needs repair

Tell us what you're seeing and we'll help you figure out the next step.

Get a free chimney chase repair estimate in Mill Creek

We'll inspect the damage on-site, show you what caused it, and give you a clear written scope and price.

Get a Free Estimate