Serving Seattle to Mount Vernon — free on-site estimates
Waterproofing & Flashing · Bothell, WA

Waterproofing & Flashing in Bothell, WA

We install the flashing, sill pans, kick-outs, penetration blocks and deck coatings that keep water out of the wall. We serve homeowners across Bothell and King and Snohomish counties.

Licensed, bonded & insured · 24-Month Workmanship Warranty · Free on-site estimate
Before: Wall under a balcony opened upBefore
After: Wall flashed and rebuiltAfter

Wall under a balcony opened, flashed and rebuilt

Bothell homes

What we see with waterproofing and flashing in Bothell

Bothell homes leak where hillside lots and tight side yards keep some walls shaded and wet, and builder-grade flashing from the 80s and 90s is reaching the end of its life. With 1980s–2000s subdivisions with fiber cement or hardboard siding and attached decks, the most common failures are missing kick-out flashing, caulk-only wall penetrations and windows with no sill pan.

Bothell sits in two counties; we cover both sides. We regularly work in Canyon Park, North Creek, Thrasher’s Corner, Maywood, Westhill and Queensborough.

Bothell straddles King and Snohomish counties along North Creek and the Sammamish River, with many homes on hillside lots. 1980s–2000s subdivisions in Canyon Park, North Creek and Thrasher’s Corner, and older homes near downtown.

Warning signs

Signs you need waterproofing and flashing in Bothell

  • Stains below vents, lights or hose bibs
  • Water marks under windows inside
  • Peeling paint below roof-to-wall joints
  • Leaks at balcony or deck doors
  • Caulk that is cracked or pulling away
Our process

How we handle waterproofing and flashing in Bothell

1

Free on-site inspection: we probe the wood, check moisture and find where the water gets in.

2

A written scope and price with photos, before any work starts.

3

We remove every damaged section and rebuild framing, sheathing and barrier as needed.

4

Flashing, siding, trim and paint so the repair matches and the leak does not come back.

Our work

Recent waterproofing & flashing projects

See all projects →
Deck waterproofing coating
Waterproofing & Flashing project
Windows, Doors & Trim project
Guide

Waterproofing & Flashing in Bothell: what you should know

Flashing is what turns water away at every joint and opening in an exterior wall. In Bothell, almost every rot repair we do traces back to flashing that was missing, installed backwards, or replaced with caulk. Good waterproofing is mostly about laps: each layer overlaps the one below it so water always runs out.

What causes it in Bothell

Kick-out flashing missing

Roof water pours into the wall where the roof edge meets siding.

No sill pans under windows and doors

Water that gets into the opening has nowhere to drain except into the framing.

Caulk-only penetrations

Dryer vents, pipes and lights without a flashed block leak once the caulk cracks.

Failed deck and balcony coatings

Walking surfaces over living space crack and let water into the framing below.

What our waterproofing and flashing includes

  • Water testing and inspection to find the actual entry point
  • Opening only the area needed around the problem
  • Kick-out flashing, head flashing, sill pans and Z-flashing
  • Flashed mounting blocks for vents, lights and pipes
  • Flashing tape lapped shingle-style into the weather barrier
  • Deck and balcony membranes or coatings where needed
  • Siding and trim reinstalled and sealed

How to prevent it

  • Check caulk joints every fall, but do not rely on caulk alone
  • Look for stains below vents, lights and roof edges
  • Keep gutters running so roof edges are not overloaded
  • Ask for kick-out flashing whenever a roof is replaced
  • Recoat balcony surfaces on the manufacturer's schedule

What affects the cost in Bothell

Most flashing repairs are small in area, so the cost is mostly labor to remove and reinstall siding around the detail. If rot is found behind it, framing and sheathing repair is added, which is why fixing flashing early is the cheapest exterior repair you can make.

How long it takes

Single flashing details usually take a few hours to a day. Balcony and deck waterproofing typically takes two to four days including cure time.

Why homeowners in Bothell choose Goodbye Rot

We fix the cause, not just the surface. Every waterproofing and flashing job starts with a free on-site inspection, moisture readings and photos, and you get a written scope and price before work begins. We are licensed, bonded and insured in Washington, and our repairs carry a 24-month workmanship warranty.

FAQ

Waterproofing & Flashing in Bothell: common questions

Can flashing be added without re-siding the whole house in Bothell?
Yes. We remove only the siding around the problem area, install the flashing correctly, and put the siding back.
Is caulk enough to stop a leak?
No. Caulk is a backup. Water management depends on flashing lapped shingle-style so water always runs out of the wall.
Which Bothell neighborhoods do you serve?
We work throughout Bothell, including Canyon Park, North Creek, Thrasher’s Corner, Maywood, Westhill and Queensborough, and nearby Kenmore, Woodinville, Mill Creek.
Is the estimate free in Bothell?
Yes. The on-site inspection and written estimate are free, with no obligation.
Free estimate

Need waterproofing & flashing in Bothell? Tell us about it.

  • Licensed, bonded & insured
  • Free on-site estimates
  • 24-month workmanship warranty

Tell us what needs repair

Tell us what you're seeing and we'll help you figure out the next step.

Get a free waterproofing and flashing estimate in Bothell

We'll inspect the damage on-site, show you what caused it, and give you a clear written scope and price.

Get a Free Estimate