Siding Repair & Replacement in Bellevue, WA
We repair or replace fiber cement, cedar and lap siding, matched to your house, with the weather barrier, flashing and clearances done right behind it. We serve homeowners across Bellevue and King County.
Before
AfterHouse wrap first, then new siding
What we see with siding repair in Bellevue
Across Bellevue, where you find mid-century 1950s–70s homes, many remodeled, plus large newer rebuilds, siding fails first where remodels that tied new rooflines, decks and windows into older walls often left gaps in the flashing where old meets new. The bottom courses and the boards around windows and decks take the most water.
Many Bellevue jobs are on remodeled homes where we trace the leak back to where the addition meets the original wall. We regularly work in Somerset, Newport Hills, Lake Hills, Crossroads, Woodridge and Bridle Trails.
Bellevue sits between Lake Washington and Lake Sammamish, with neighborhoods on hills like Somerset and Newport Hills facing open weather. Mid-century 1950s–70s homes, many remodeled with additions, and large new rebuilds.
Signs you need siding repair in Bellevue
- Swollen or flaking bottom edges on fiber cement
- Cracked, cupped or split boards
- Gaps at butt joints and corners
- Siding touching soil, mulch or a roof
- Mold or stains running down the wall
How we handle siding repair in Bellevue
Free on-site inspection: we probe the wood, check moisture and find where the water gets in.
A written scope and price with photos, before any work starts.
We remove every damaged section and rebuild framing, sheathing and barrier as needed.
Flashing, siding, trim and paint so the repair matches and the leak does not come back.
Recent siding repair & replacement projects
Siding options for Bellevue homes
Fiber cement (James Hardie)
HardiePlank lap, shingle and panel siding. Will not rot, resists fire and pests, and holds paint well. The most common choice for our climate.
Western red cedar
Natural wood lap, bevel or shingles. Beautiful and traditional, but needs regular paint or stain to last.
Engineered wood (LP SmartSide)
Treated wood-strand siding that is lighter than fiber cement and comes in long lengths.
Board and batten
Vertical panels with battens over the seams, in fiber cement or wood, popular on modern farmhouse and accent walls.
Siding in Bellevue
Bellevue sits between Lake Washington and Lake Sammamish, with neighborhoods on hills like Somerset and Newport Hills facing open weather.
Typical homes: Mid-century 1950s–70s homes, many remodeled with additions, and large new rebuilds.
Bellevue remodels often leave mismatched siding; we repair or re-side to tie the original house and additions together.
We regularly work near Somerset, Lake Hills, Newport Hills and Bridle Trails.
Repair or full replacement?
Section repair
Damage is local, the barrier behind it is sound, and the siding can be matched. Common at roof lines, windows and the bottom courses.
Full wall
One wall takes most of the weather or has failed throughout. We strip and re-side the wall so it all matches.
Whole house
Siding has reached the end of its life, is a discontinued product like old hardboard, or you want a new look and full new barrier.
We open a small area first to check the barrier and sheathing, then tell you which option fits.
Fiber cement installed the way it should be
- About 6 inches of clearance above soil and mulch, and 1–2 inches above roofs and decks
- Kick-out flashing wherever a roof edge meets a wall
- Flashing behind every butt joint
- Primed and sealed cut ends
- Head flashing over windows and doors, sill pans under them
- Weather barrier lapped shingle-style, with taped seams around openings
- Correct nailing, never face-nailed too tight
Most fiber cement failures we see are installation problems, not product problems. Getting these details right is what makes a siding job last.
Paint and color
Fiber cement can come factory-painted (James Hardie ColorPlus) or primed and painted on site. Factory finish is very durable; field paint lets you match any color exactly and touch up easily. For repairs we match your existing color so the new section blends in.
Siding Repair & Replacement in Bellevue: what you should know
Siding is the outer shell that sheds most of the rain, but it is not the only waterproofing. Behind it are the weather barrier and flashing that catch the water that gets past. In Bellevue, we see siding fail where those layers were skipped or have worn out, and where boards sit too close to the ground, decks or roofs. A good siding repair fixes the surface and the details behind it.
What causes it in Bellevue
No clearance at grade
Fiber cement needs about 6 inches above soil and mulch, and around 2 inches above roofs and decks. Buried edges swell, flake and rot the wall behind them.
Unsealed cut ends and butt joints
Fiber cement cut edges must be primed and joints flashed. Without that, water wicks in and the planks swell.
Worn-out weather barrier
Older felt or torn house wrap lets water reach the sheathing, especially at seams and around openings.
Paint failure
Once paint cracks and peels, wood siding takes on water and fiber cement edges start to break down.
What our siding repair includes
- Inspection of the siding, barrier and sheathing behind it
- Removal of damaged siding and trim
- Sheathing repair where the wall is soft
- New weather barrier lapped into the existing barrier
- Flashing at windows, doors, roof lines and penetrations
- New siding matched to profile, exposure and texture
- Primer and paint matched to your house, or factory-finished siding
How to prevent it
- Keep landscaping and mulch below the bottom course
- Repaint before paint fails, and touch up chips at cut edges
- Clean siding gently once a year to remove moss and mildew
- Fix gutter overflow so water does not sheet down the wall
- Have flashing checked whenever you replace a roof or add a deck
What affects the cost in Bellevue
Siding cost depends on the material (fiber cement, cedar or engineered wood), the size of the area, how many windows and corners it includes, and whether the sheathing behind it is sound. A section repair costs far less than a full wall, and a full wall far less than a whole house. We tell you which one you need after opening the area and checking the barrier.
How long it takes
A section repair usually takes one to two days. A full wall takes two to four days, and a whole-house re-side typically takes one to three weeks depending on size, trim details and weather.
Why homeowners in Bellevue choose Goodbye Rot
We fix the cause, not just the surface. Every siding repair job starts with a free on-site inspection, moisture readings and photos, and you get a written scope and price before work begins. We are licensed, bonded and insured in Washington, and our repairs carry a 24-month workmanship warranty.
Siding Repair & Replacement in Bellevue: common questions
Can you match my existing siding in Bellevue?
Do I need to replace all my siding?
What is the best siding for Bellevue weather?
Can you match my existing siding?
How long does re-siding a house take?
Do you replace the house wrap too?
Is fiber cement worth the cost?
Which Bellevue neighborhoods do you serve?
Is the estimate free in Bellevue?
Other repairs we do in Bellevue
Siding Repair & Replacement near Bellevue
Need siding repair & replacement in Bellevue? Tell us about it.
- Licensed, bonded & insured
- Free on-site estimates
- 24-month workmanship warranty
Get a free siding repair estimate in Bellevue
We'll inspect the damage on-site, show you what caused it, and give you a clear written scope and price.