Serving Seattle to Mount Vernon — free on-site estimates
Fascia & Soffit Repair · Arlington, WA

Fascia & Soffit Repair in Arlington, WA

We rebuild rotted fascia, rafter tails, roof edges and soffits, add drip edge and re-hang gutters with proper slope. We serve homeowners across Arlington and Snohomish County.

Licensed, bonded & insured · 24-Month Workmanship Warranty · Free on-site estimate
Before: Rotted siding and sheathing at a cornerBefore
After: Siding corner repaired and paintedAfter

Rotted siding corner, opened up and rebuilt

Arlington homes

What we see with fascia and soffit repair in Arlington

In Arlington, where wind and rain across the open Stillaguamish valley hit exposed walls, decks and outbuildings hard, gutters clog and overflow and water soaks the fascia behind them. Homes with 1990s–2010s subdivisions and rural homes on larger lots often have fascia that has never had a drip edge.

Arlington is a short drive north of our Marysville base. We regularly work in Smokey Point, downtown Arlington, Gleneagle and Arlington Heights.

Arlington sits in the Stillaguamish River valley, where open farmland lets wind and rain hit homes and outbuildings with little shelter. 1990s–2010s subdivisions around Smokey Point and Gleneagle, older homes near downtown, and rural homes with shops and barns.

Warning signs

Signs you need fascia and soffit repair in Arlington

  • Peeling paint or soft spots on fascia boards
  • Gutters pulling away or sagging
  • Stains on the soffit
  • Birds or pests getting into the eaves
  • Shingles curling over the edge with no drip edge
Our process

How we handle fascia and soffit repair in Arlington

1

Free on-site inspection: we probe the wood, check moisture and find where the water gets in.

2

A written scope and price with photos, before any work starts.

3

We remove every damaged section and rebuild framing, sheathing and barrier as needed.

4

Flashing, siding, trim and paint so the repair matches and the leak does not come back.

Our work

Recent fascia & soffit repair projects

See all projects →
Gable wall after siding repair
Side wall after re-siding
New siding, painted
Guide

Fascia & Soffit Repair in Arlington: what you should know

Fascia boards carry your gutters and close off the ends of the rafters. Soffits close the underside of the overhang and vent the attic. In Arlington, fascia rots where gutters clog and overflow, and where the roof edge was installed without a drip edge so water curls back behind the gutter.

What causes it in Arlington

No drip edge

Water runs off the shingles and back behind the gutter onto the fascia.

Clogged or sagging gutters

Overflowing gutters soak the fascia and rafter tails.

Ice and debris buildup

Leaves and needles hold water at the roof edge for weeks.

Pest damage

Soft fascia and gaps let birds, squirrels and insects into the eaves.

What our fascia and soffit repair includes

  • Removal and reinstallation or replacement of gutters
  • Removal of rotted fascia, roof edge and soffit
  • Sistering or replacing rafter tails
  • New fascia in primed wood or composite
  • New soffit with venting
  • Drip edge at the roof edge
  • Gutters re-hung with hidden hangers and correct slope

How to prevent it

  • Clean gutters at least twice a year, more under trees
  • Add drip edge when the roof is replaced
  • Keep gutters sloped toward downspouts
  • Trim branches back from the roof
  • Repaint fascia before the paint fails

What affects the cost in Arlington

Fascia-only repair is straightforward. When rafter tails or the roof sheathing at the edge have rotted, the work takes longer. Gutter replacement can be done at the same time and often makes sense when the old gutters are bent or undersized.

How long it takes

Most fascia and soffit repairs take one to three days, depending on length and how much of the roof edge needs work.

Why homeowners in Arlington choose Goodbye Rot

We fix the cause, not just the surface. Every fascia and soffit repair job starts with a free on-site inspection, moisture readings and photos, and you get a written scope and price before work begins. We are licensed, bonded and insured in Washington, and our repairs carry a 24-month workmanship warranty.

FAQ

Fascia & Soffit Repair in Arlington: common questions

Can you repair fascia without a new roof in Arlington?
Yes. We replace the fascia, rafter tails and roof edge locally and install drip edge without replacing the whole roof.
Should gutters come off for fascia repair?
Yes, the gutters come down so we can rebuild the fascia, then go back up with hidden hangers and proper slope.
Which Arlington neighborhoods do you serve?
We work throughout Arlington, including Smokey Point, downtown Arlington, Gleneagle and Arlington Heights, and nearby Marysville, Lake Stevens, Stanwood.
Is the estimate free in Arlington?
Yes. The on-site inspection and written estimate are free, with no obligation.
Free estimate

Need fascia & soffit repair in Arlington? Tell us about it.

  • Licensed, bonded & insured
  • Free on-site estimates
  • 24-month workmanship warranty

Tell us what needs repair

Tell us what you're seeing and we'll help you figure out the next step.

Get a free fascia and soffit repair estimate in Arlington

We'll inspect the damage on-site, show you what caused it, and give you a clear written scope and price.

Get a Free Estimate