Serving Seattle to Mount Vernon — free on-site estimates
Chimney Repair · Kenmore, WA

Chimney Repair in Kenmore, WA

We rebuild wood-framed chimney chases: framing, sheathing, siding, flashing and a sloped cover that sheds water. We serve homeowners across Kenmore and King County.

Licensed, bonded & insured · 24-Month Workmanship Warranty · Free on-site estimate
Before: Rotted chimney chase framingBefore
After: Chimney chase rebuilt with new sheathingAfter

Rotted chimney chase framing replaced

Kenmore homes

What we see with chimney chase repair in Kenmore

Many Kenmore homes with 1960s–80s homes near the north end of Lake Washington and on wooded slopes have wood-framed chimney chases. Where lake exposure and wooded slopes keep siding and decks wet, and many older decks were attached without ledger flashing, flat chase covers rust and leak, and the chase framing rots from the top down.

Kenmore is a short drive from our Woodinville office. We regularly work in Inglewood, Moorlands, Arrowhead, Uplake and Northshore Summit.

Kenmore sits at the north end of Lake Washington, with homes on wooded slopes above the lake and along the Sammamish River. 1960s–80s homes on wooded slopes, lakeside homes, and newer infill near downtown.

Warning signs

Signs you need chimney chase repair in Kenmore

  • Rust streaks running down the chase siding
  • A flat or sagging chase cover
  • Soft or bulging siding on the chase
  • Water stains near the fireplace inside
  • Cracked siding at the top of the chase
Our process

How we handle chimney chase repair in Kenmore

1

Free on-site inspection: we probe the wood, check moisture and find where the water gets in.

2

A written scope and price with photos, before any work starts.

3

We remove every damaged section and rebuild framing, sheathing and barrier as needed.

4

Flashing, siding, trim and paint so the repair matches and the leak does not come back.

Our work

Recent chimney repair projects

See all projects →
Rotted chimney chase with the siding off
Chimney Repair project
Chimney Repair project photo
Guide

Chimney Repair in Kenmore: what you should know

Many homes in Kenmore have wood-framed chimney chases, boxes framed and sided like the house around a metal flue. The top of the chase is closed with a metal cover. When that cover is flat or rusted, it holds water, and the chase framing rots from the top down.

What causes it in Kenmore

Flat or sagging chase covers

Galvanized covers rust and hold water instead of shedding it.

Missing storm collar

Water runs down the flue pipe into the chase.

Poor roof-to-chase flashing

Step flashing and counter flashing at the roof line fail and leak into the chase.

Siding without clearance at the roof

Chase siding that touches the roof soaks up water.

What our chimney chase repair includes

  • Inspection of cover, flashing, siding and framing
  • Removal of damaged siding, sheathing and framing
  • New studs, top plates and blocking
  • New sheathing and weather barrier
  • Step and counter flashing at the roof line
  • New siding and trim matched to the house
  • Sloped stainless chase cover with drip edge and storm collar

How to prevent it

  • Look for rust streaks on chase siding
  • Replace flat galvanized covers with sloped stainless ones
  • Make sure the storm collar is sealed at the flue
  • Have roof flashing checked when the roof is replaced
  • Keep chase siding painted

What affects the cost in Kenmore

Replacing a chase cover alone is a modest job. When the framing at the top of the chase has rotted, the work includes scaffolding or roof access, framing, sheathing and siding, which adds up quickly. Catching a rusted cover early is far cheaper than rebuilding a chase.

How long it takes

A cover replacement usually takes a day. A chase rebuild with framing and siding takes three to seven days depending on height and roof access.

Why homeowners in Kenmore choose Goodbye Rot

We fix the cause, not just the surface. Every chimney chase repair job starts with a free on-site inspection, moisture readings and photos, and you get a written scope and price before work begins. We are licensed, bonded and insured in Washington, and our repairs carry a 24-month workmanship warranty.

FAQ

Chimney Repair in Kenmore: common questions

How do I know if my chase cover is leaking in Kenmore?
Rust stains on the siding, standing water on the cover and soft siding near the top are the usual signs. We check the framing during the inspection.
Do you replace the chase cover too?
Yes. We install a sloped stainless cover with a drip edge and storm collar so water runs off instead of pooling.
Which Kenmore neighborhoods do you serve?
We work throughout Kenmore, including Inglewood, Moorlands, Arrowhead, Uplake and Northshore Summit, and nearby Bothell, Lake Forest Park, Kirkland.
Is the estimate free in Kenmore?
Yes. The on-site inspection and written estimate are free, with no obligation.
Free estimate

Need chimney repair in Kenmore? Tell us about it.

  • Licensed, bonded & insured
  • Free on-site estimates
  • 24-month workmanship warranty

Tell us what needs repair

Tell us what you're seeing and we'll help you figure out the next step.

Get a free chimney chase repair estimate in Kenmore

We'll inspect the damage on-site, show you what caused it, and give you a clear written scope and price.

Get a Free Estimate